LCGB Forums

by **al pushpak** » Mon Jan 08, 2024 1:05 pm

Hi,is anyone on here running a RT 225 kit along with a 30mm carb,EX box exhaust & 4 speed box? cheers

by **ULC Soulagent** » Mon Jan 08, 2024 7:43 pm

Have run something similar

by **al pushpak** » Mon Jan 08, 2024 8:18 pm

ULC Soulagent wrote:Have run something similar

Was that on a Rt 225?

by **Martin s** » Mon Jan 08, 2024 9:21 pm

Hi, I'm running the rest of that set up with an st box and pacemaker gearing.

by **Adam_Winstone** » Mon Jan 08, 2024 11:47 pm

^... but surely not with the standard 15/46 sprockets?

by **dickie** » Tue Jan 09, 2024 7:51 am

I'm running that set up but mine is reed-valved. GP200 and 20/47 final ratio. Lovely to ride.

Never been on a dyno. I should sort it out really.

by **al pushpak** » Tue Jan 09, 2024 8:35 am

cheers guys

by **bookertmgs1** » Tue Jan 09, 2024 12:35 pm

Similar

RT230 / reed / BGM v3 / LI150 / 30mm PHBH

what were you looking for ?

by **al pushpak** » Tue Jan 09, 2024 12:47 pm

Martin s wrote:Hi, I'm running the rest of that set up with an st box and pacemaker gearing.

How does it perform with that set up mate ?

by **a-teamlambretta** » Tue Jan 09, 2024 7:06 pm

I have an rt225/phbh30/Gori .

by **ULC Soulagent** » Fri Jan 12, 2024 11:50 am

al pushpak wrote:
ULC Soulagent wrote:Have run something similar

Was that on a Rt 225?

Sorry yes RT230, 30 delly, bgm sport clubby, sx200 gear set 16/46

by **Martin s** » Tue Feb 06, 2024 10:23 pm

Late reply!
It runs really well with 17/46 pacemaker, it's hilly where I live and probably could go lower on the final drive, but I'm
happy with it.

RT 225 Kit