LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

LI 150 Pacemaker

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

LI 150 Pacemaker

Postby col1968 » Thu Jun 05, 2014 9:20 pm

Hi there what are peoples opinions on this gearbox.Thanks
col1968
 
Posts: 15
Joined: Thu Jun 05, 2014 1:30 pm
Location: Ruskington Lincolnshire

Re: LI 150 Pacemaker

Postby petemaisey » Thu Jun 05, 2014 10:02 pm

I love it. It has a nice close set of ratios. However you don't get any thing for nothing. I'm using it in my iron barrel 225 Gp with a Clubman and 22 Dellorto through a standard airbox. It achieved 71.4mph on the David Blyth mad mile. The drawer back is that to get a good top gear ratio means you have a high first gear. I find I have to slip the clutch a little more than normal in order to get going.

Pete
petemaisey
 
Posts: 75
Joined: Mon Jun 02, 2014 6:44 pm

Re: LI 150 Pacemaker

Postby col1968 » Fri Jun 06, 2014 6:23 pm

Thanks for your reply Pete, i run a Mugello186cc Chiselspeed tuned,28mm Dellorto, Ancillotti pipe. Its just i have to give it some throttle in 3rd before i go into 4th or else she bogs down.Col
col1968
 
Posts: 15
Joined: Thu Jun 05, 2014 1:30 pm
Location: Ruskington Lincolnshire

Re: LI 150 Pacemaker

Postby petemaisey » Fri Jun 06, 2014 6:47 pm

I should have said I am using GP reduction, 18/47.

Pete
petemaisey
 
Posts: 75
Joined: Mon Jun 02, 2014 6:44 pm

Re: LI 150 Pacemaker

Postby Jazzy b » Fri Jun 06, 2014 7:30 pm

Got one in my sx running stage 4 af 175 got to say it flys compered with same set up on my s2 but the 2 is laden with accessories 8-)
Jazzy b
 
Posts: 528
Joined: Fri May 30, 2014 7:12 pm

Re: LI 150 Pacemaker

Postby Captain Pugwash » Fri Jun 06, 2014 7:56 pm

Just removed a Cyclone 5 speed to put a Pacemaker gearbox in my TS1
User avatar
Captain Pugwash
 
Posts: 422
Joined: Fri May 30, 2014 7:48 pm
Location: Liverpool

Re: LI 150 Pacemaker

Postby torquewrench » Fri Jun 06, 2014 8:13 pm

Captain Pugwash wrote:Just removed a Cyclone 5 speed to put a Pacemaker gearbox in my TS1

Not intended to be a silly question, but why ?
User avatar
torquewrench
 
Posts: 79
Joined: Wed Jun 04, 2014 4:36 pm

Re: LI 150 Pacemaker

Postby Adam_Winstone » Sat Jun 07, 2014 10:42 am

^... that was my first thought/question too.
Adam_Winstone
 
Posts: 1080
Joined: Tue Jun 03, 2014 1:52 pm

Re: LI 150 Pacemaker

Postby col1968 » Sun Jun 08, 2014 10:15 am

i was thinking of changing from a LI150 Pacemaker to an Italian LI150 but, from the response from you gents, i am sticking with the Pacemaker.Thankyou.
col1968
 
Posts: 15
Joined: Thu Jun 05, 2014 1:30 pm
Location: Ruskington Lincolnshire

Re: LI 150 Pacemaker

Postby G.I » Tue Jun 10, 2014 12:57 pm

Is the "stronger" third gear a straight replacement for the "weaker" one or are there other factors I haven't thought of yet?
G.I
 
Posts: 7
Joined: Sat May 31, 2014 1:39 pm


Return to Tuning & Kits

Who is online

Users browsing this forum: No registered users and 10 guests