LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Bedding in TS1 rings?

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

Bedding in TS1 rings?

Postby Lammer205 » Wed Aug 13, 2014 5:11 pm

How many miles do new Ts1 rings need running i for? thanks
Lammer205
 
Posts: 68
Joined: Sat May 31, 2014 11:39 pm

Re: Bedding in TS1 rings?

Postby speedy » Wed Aug 13, 2014 11:42 pm

For me Zero miles, never have done and never any issues as they are very good quality. I would only run in if it were a new piston and rings,cheers,Speedy.
speedy
 
Posts: 98
Joined: Wed Jun 04, 2014 9:43 pm

Re: Bedding in TS1 rings?

Postby Toddy » Thu Aug 14, 2014 6:20 am

50-100 miles then wang it :D
User avatar
Toddy
 
Posts: 9704
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: Bedding in TS1 rings?

Postby berniek » Thu Aug 14, 2014 11:01 am

I do not understand the question! :D
berniek
 
Posts: 106
Joined: Sat May 31, 2014 1:46 pm

Re: Bedding in TS1 rings?

Postby gaz_powell » Thu Aug 14, 2014 11:44 am

None - just do as you should always do - warm it up before you give it some stick
gaz_powell
 
Posts: 3092
Joined: Sat May 31, 2014 7:56 pm
Location: Hartlepool

Re: Bedding in TS1 rings?

Postby corrado » Fri Aug 15, 2014 1:31 am

1. put key in ignition, switch to on position.
2. start scooter by means of kick start.
3. job done.

[Alledgedly]*
User avatar
corrado
 
Posts: 610
Joined: Sun Jun 01, 2014 1:49 am
Location: Blackpool

Re: Bedding in TS1 rings?

Postby Lammer205 » Mon Aug 18, 2014 7:21 pm

Thanx for all the advice, i have taken onboard all of your advice so i start the scoot a quick run up the local road ok it's running back home pack the for the weekend and then another 120 miles up the motorway flat out, so rings now well bedded in. ;)
Lammer205
 
Posts: 68
Joined: Sat May 31, 2014 11:39 pm


Return to Tuning & Kits

Who is online

Users browsing this forum: Google [Bot] and 15 guests