Which Clubman have I got.

[St George]

Came with a project I bought last year, looks to be 42mm, it has a rod welded from the back of the silencer to the tail pipe. Otherwise looks like any other clubman with no markings on it. U Pipe, one piece normal fitting. Thanks

[ToBoldlyGo]

Not much to go on. Could be a Sito Ancillotti perhaps.

[HxPaul]

If it has a two piece downpipe it could be a scootopia copy of an Ancilotti.

[St George]

One piece pipe. Internal of pipe 35 mm, external 40 mm. Can't post pictures sorry.

[Toddy]

One piece pipe. Internal of pipe 35 mm, external 40 mm. Can't post pictures sorry.

If you want to e mail pics to me I can post for you paul.todd2@yahoo.co.uk

[vegansydney]

As noted above due the strengthening bracket it could be anything from a Sito Ancilottii (TS/Evergreen), an RS Clubman or a even a homemade addition to another Clubman. Please post some photos.

[ToBoldlyGo]

If you are the one that posted on FB I can tell you that it looks like an Indian big bore exhaust.

[St George]

Pics sent to Toddy so everyone can see. Thanks for replies.

[Toddy]

There you go buddy

[ToBoldlyGo]

Indian big bore. Rough as a bears arse.

[al pushpak]

"Indian big bore. Rough as a bears arse" But perform a lot better than most of the more expensive club mans available out there !

[St George]

Thanks lads, it does sound nice. Job done.

[vegansydney]

If you plan on fitting it, I'd spend 10 minutes blending the U-bend where it mounts on the exhaust port with a Dremmel (or similar tool). This will aid the flow of exhaust gases.

I'm surprised you can't see sunlight through it That said, it looks no better than all the Casa U-bends (S3/GP/dl) I've seen

[St George]

Thanks, the other side of the flange is nicely welded. Can fill the gaps with exhaust putty. Cheers.