Hi All
Quick question (hopefully!)
GT186 with 30mm PHBH, 60/110 crank and Avanti Ex Box pipe. Varitronic ignition with Readspeed adjustable CDI.
Was running the following jetting;
135 main
X13 needle, 1 clip from top
AV268
40 slide
55 pilot
70 choke
300 float needle
As recommended by Rich T.
Originally had a TSR Evo on there so I have now put a slightly smaller 130 main jet in.
Runs great, but when you back off the throttle from wide open it momentarily seems to pick up speed. It also did this with the expansion and larger main jet. It just seems like it runs a little freer and prefers to be slightly backed off from full throttle.
Does anyone know what this means?
Thanks.