The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
martyn dwane wrote:I run a wiseco piston in my TS1 200 but run with a RD400 conrod.
gaz_powell wrote:I'm running an RD400 rod with Wossner IT 175 piston.
Had 1mm off bottom off barrel to get correct sqush.
Head is SIL machined as piston crown profile different to a lambretta piston
Knowledge wrote:Mitaka do a 66mm piston for the RD350 and 350YPVS on the last oversize. Have a look at the website.
https://www.mitaka.co.uk/ROAD_BIKE_PISTONS/YAMAHA/350LCP
Just saying.
Users browsing this forum: Google [Bot] and 2 guests