LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Clutch

Might be worth while looking in here first, as we post the most frequently asked questions within here!

Clutch

Postby Mick1499 » Tue Mar 24, 2020 11:17 pm

Ok boys your views please complete rebuild when trying to start can feel the clutch slightly engaging.slack clutch off starts fine then it’s not engaging enough when in gear ? It one or the other
Mick1499
 
Posts: 7
Joined: Mon Mar 02, 2020 8:11 pm
Location: Grays Thurrock essex

Re: Clutch

Postby Knowledge » Mon Mar 30, 2020 9:01 am

Is this a standard four plate clutch as Innocenti intended, or an upgraded clutch?
User avatar
Knowledge
 
Posts: 1468
Joined: Sat May 31, 2014 11:42 am
Location: Ipswich

Re: Clutch

Postby Mick1499 » Mon Mar 30, 2020 9:54 pm

Standard but has sirflex plates
Mick1499
 
Posts: 7
Joined: Mon Mar 02, 2020 8:11 pm
Location: Grays Thurrock essex

Re: Clutch

Postby rossclark » Mon Mar 30, 2020 10:01 pm

There are some batches of 'Surflex' branded plates that are too thick - something like 15.5 mm for the four. They should be about 14 mm for the four cork plates. You can manage that out using thinner steels or top plates to allow more separation. Personally if you find they're some of these I'd get something else.
User avatar
rossclark
 
Posts: 2699
Joined: Fri May 30, 2014 11:23 pm
Location: Lanarkshire


Return to Frequently Asked Questions

Who is online

Users browsing this forum: No registered users and 0 guests