LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at

TS1 gearing

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

TS1 gearing

Postby Sixpennyblue » Sat May 23, 2020 5:53 pm

I have recently brought a gp200 with a ts1 225, it is fine in the first 3 gears but will not pull 4th, i am running it with a jl3 and 30mm carb. Checked the gearing and it has an LI150 gearbox with 18 - 47 sprockets. Should I change to 16 or 17 front or I do have a spare 46 rear sprocket Any advise would be welcome. Thanks
Posts: 1
Joined: Mon Oct 27, 2014 8:32 pm

Re: TS1 gearing

Postby martyn dwane » Sat May 23, 2020 7:30 pm

that gearing and sprocket combination gives a top gear ratio of 4.44 ,Af recomend anywhere between 4.7 to 5.3 depending on exhaust .
google Gearbox visuliser By Avatone , you can imput different sprocket combo`s on any chosen gearbox.
Incidently AF recomend 4.7 with a JL3 exhaust , which you could achieve with a 17 tooth front sprocket.
martyn dwane
Posts: 137
Joined: Tue Jun 03, 2014 10:06 pm

Re: TS1 gearing

Postby dscscotty » Sun May 24, 2020 1:40 pm

4.7 =47x17 46x17=4.6
Posts: 571
Joined: Fri May 30, 2014 7:42 pm

Re: TS1 gearing

Postby ULC Soulagent » Mon May 25, 2020 11:51 am

Go 16/46 giving a nice 4.9 fd with ur Jl3 and carb 8-)
User avatar
ULC Soulagent
Posts: 1278
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes

Re: TS1 gearing

Postby Feersum Injun » Tue May 26, 2020 12:15 pm

Mine is set up with 47x17 (4.7) with 110/60 crank and JL3 pipe. Good set up for me... decent pull through the gears and sits nicely in 4th on the road. Not that happy on some sharp hills though! 28mm delly as well...
User avatar
Feersum Injun
Posts: 215
Joined: Tue Apr 26, 2016 11:21 pm
Location: Wirral

Return to Tuning & Kits

Who is online

Users browsing this forum: No registered users and 22 guests