Getting the loop into a good position and with the clearance for the top shock mount is the first problem.
The next consideration is the legshields, in relationship to the loop. Most conversions ive seen use a fabricated bridge piece, i wanted to try and do it as the ld was done, without . The loop needed cutting
and leg shields needs altering and extended a little.
Interestingly , well at least to me

the holes in the ld leggies line up with the (in my case ) S2 floor struts
Most people ive talked too have used an Ld tube forward of the bridge area, i couldnt understand why ? plus its easier (for me) to use a "normal" tube..... Perhaps its because the angles are slightly different ? a few cuts seemed to make them fit.

Once i got the leggies positioned i could level the loop up and tack it on
WARNING !!! dont look at my welding ! ...as you may have noticed from the surroundings in the pics , wood is my material

not metal ....ill get a professional to weld it up properly

