Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
by Paul_from_Thornbury » Wed Apr 20, 2016 8:14 pm
Anyone know what the correct length of a stand Spring is, I've got two aftermarket ones which are slightly long as my stand droops and if I pull the stand up under the running boards with my heel the spring pops off.
From outside of loop to outside of loop mine are 110mm long.
-
Paul_from_Thornbury
-
- Posts: 132
- Joined: Fri Jun 20, 2014 10:32 am
by Toddy » Thu Apr 21, 2016 6:22 am
Are you sure the two main Fixing bolts on your stand are not loose as this would cause the same issue as spring length ?
-

Toddy
-
- Posts: 10531
- Joined: Tue May 13, 2014 9:58 pm
- Location: East Yorkshire
by Dimitrios_231 » Thu Apr 21, 2016 7:52 am
I don't know the correct length,sorry,the length can be different and it plays a major role.
I usually shop with a spring in my hand to compare.
These 3 springs are supposed to be from the same manufacturer.
You do not have the required permissions to view the files attached to this post.
-

Dimitrios_231
-
- Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
by Dimitrios_231 » Thu Apr 21, 2016 3:48 pm
Τhis pic was taken a couple of years ago,
I can't remember

,
I'll check if I have any notes on my logbook,
sometimes I write down on paper some anorak pretty useless things

-

Dimitrios_231
-
- Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
by Tony Hart » Thu Apr 21, 2016 5:10 pm
Hi Paul
I just measured one that I took off my latest project and it is 105mm from outside loop to outside loop
Tony
-

Tony Hart
-
- Posts: 619
- Joined: Sat May 31, 2014 10:12 pm
- Location: Rutland
by MK Monty » Thu Apr 21, 2016 5:17 pm
I'm sure series 1/2 are not the same length as series 3. But I don't know which is longer. Personally I steer clear of the stainless ones rather have a bit of rust.
-

MK Monty
-
- Posts: 340
- Joined: Sun Jun 01, 2014 10:32 pm
- Location: Stockport
by Tony Hart » Thu Apr 21, 2016 5:24 pm
MK Monty wrote:I'm sure series 1/2 are not the same length as series 3. But I don't know which is longer. Personally I steer clear of the stainless ones rather have a bit of rust.
The rusty one I measured came off a rusty Spanish S2. Most dealers I use don't have different springs listed for S1/2 or 3. Scooter Restorations does have a slightly longer one listed for late Indian GPs
Tony
-

Tony Hart
-
- Posts: 619
- Joined: Sat May 31, 2014 10:12 pm
- Location: Rutland
by Dimitrios_231 » Thu Apr 21, 2016 7:28 pm
Measured two used.
Left one 106.5.right 105.2 from outside loop to outside loop.
I always keep the left one as a spare in the toolbox .
You do not have the required permissions to view the files attached to this post.
-

Dimitrios_231
-
- Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
by hullygully » Sat Apr 23, 2016 10:50 am
also depends on the correct welded position of the stand cross member & if your using an Indian stand as I've got some stainless steel ones where they're defo welded in wrong position grrrrrrrrr

-
hullygully
-
- Posts: 2450
- Joined: Thu Jun 05, 2014 1:28 pm
- Location: Hull
Return to Series 1, 2 & 3
Who is online
Users browsing this forum: Baidu [Spider], Bing [Bot], Google [Bot] and 23 guests