Complete Spanners Manual 3rd Edition

[Phil D]

As well as Samaritans , contact numbers for
Relate , Debt management , all major loan company's and how to live cheaply so you have as much disposable income to convert said shopping trolley into trans continental ballistic missile.

[Knowledge]

A list of the tuned lengths of all the readily available expansion pipes.

How to convert an AC six pole stator to a DC stator using a Wassel or alternative regulator/rectifier.

[coaster]

Lighting upgrades including fitting Jockeys units and HID conversions for which I still have photos of my latest installation if they are of any use

Long range fuel tank options.

Engine case cleaning options

Current top end kit overviews

Colin

[Sticky]

Thanks for the feedback guys. Keep it coming.

There probably won't be room for all of this because we need to keep under postage limits that a postman can carry without needing an osteopath.

[landybretta]

Great news. I've already started dropping a few hints to the wife..................................it will be available for Christmas I assume.

More details on lighting upgrades please. Such as H4, Xenon, Jockeys for example.

[Covboy]

i would like to see common performance exhausts and basic upgrade comparisons on dyno graphs.

[compass]

5 speed gearbox options and set ups

[Sticky]

Great news. I've already started dropping a few hints to the wife..................................it will be available for Christmas I assume.

More details on lighting upgrades please. Such as H4, Xenon, Jockeys for example.

More likely to be summer next year for release.

[Leotech]

A slightly more specific index in the back. Whilst not a necessity, many times I look for some quick reference and the headings seem very general and some things have 3 or 4 sections where different aspects are covered.


Also the red and green sections could be kind of condensed into their own reference section which would benefit more experienced readers who don't necessarily need to read the whole book every time they did a small job but if the warning and tips were listed under headings that would be very helpful.

[ToBoldlyGo]

Sell it as a part work with laminated pages to avoid greasy fingerprints.

[Marty ULC]

Sell it as a part work with laminated pages to avoid greasy fingerprints.

My first one is sat in the garage with the torque settings page nearly illegible.
Must get round to copying and laminating that page

[Angry Bloke]

Having just built one with out the use of a manual ,I'd love to see a Luna Section

[gizmo]

What about a piece on how to spot a disaster before it happens. Probably a lot of new riders won't have a clue about 2 strokes. How to spot a potential seize, brake binding etc or would you need a another book to list everything

[Wack]

I think the other two versions do their job so why not bring a tuning guide out to include all the kits, casings , ignitions etc that are now available? Think, The Webster Tuning manual for the Millennium.

[Knowledge]

Good idea Wack. Two manuals will sell for twice as much. Think of the extra income Sticky.

[grandpa]

Hi
+1 on wassell dc,,leak testing, Spanish jet 200/Lince,how to register an import and fill in nova,v5 tuning carbs needles jets float valves etc
Online access to extra features like tuning perhaps for a small fee/subscription like many newspapers.
Grandpa

[MickYork]

How to make the back brake work............

[steveg]

list of must carry tools and spares

[Cortez the killer]

Section on how to use the engine mount removal tool.

[Fast n Furious]

I think it would be prudent to point out about the dangers associated with the use of aftermarket offset engine mounting cones.
These should never be used to compensate for poor frame alignment for starters. Get the frame rejigged if that's the case.
There is a danger that if the mounting bar is not tight enough, then the cones can revolve in their housing and cause severe misalignment between the front and rear wheel.
If you must use them, then they should be grub screw locked into position to prevent rotation should the mounting bar nuts become loose!