LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Which Clubman have I got.

Need help with a tuning kit, how do you tune your scooter, which kit should I choose, and all general tuning and modifcations questions are for in here.

Which Clubman have I got.

Postby St George » Fri Feb 14, 2020 6:06 pm

Came with a project I bought last year, looks to be 42mm, it has a rod welded from the back of the silencer to the tail pipe. Otherwise looks like any other clubman with no markings on it. U Pipe, one piece normal fitting. Thanks
St George
 
Posts: 821
Joined: Fri May 30, 2014 3:48 pm

Re: Which Clubman have I got.

Postby ToBoldlyGo » Fri Feb 14, 2020 9:58 pm

Not much to go on. Could be a Sito Ancillotti perhaps.
ToBoldlyGo
 
Posts: 697
Joined: Thu Jul 02, 2015 7:34 pm

Re: Which Clubman have I got.

Postby HxPaul » Sat Feb 15, 2020 10:09 am

If it has a two piece downpipe it could be a scootopia copy of an Ancilotti.
User avatar
HxPaul
 
Posts: 1541
Joined: Fri May 30, 2014 9:18 am
Location: Halifax

Re: Which Clubman have I got.

Postby St George » Sat Feb 15, 2020 4:01 pm

One piece pipe. Internal of pipe 35 mm, external 40 mm. Can't post pictures sorry.
St George
 
Posts: 821
Joined: Fri May 30, 2014 3:48 pm

Re: Which Clubman have I got.

Postby Toddy » Sat Feb 15, 2020 4:17 pm

St George wrote:One piece pipe. Internal of pipe 35 mm, external 40 mm. Can't post pictures sorry.


If you want to e mail pics to me I can post for you paul.todd2@yahoo.co.uk
User avatar
Toddy
 
Posts: 6957
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: Which Clubman have I got.

Postby vegansydney » Sat Feb 15, 2020 8:26 pm

As noted above due the strengthening bracket it could be anything from a Sito Ancilottii (TS/Evergreen), an RS Clubman or a even a homemade addition to another Clubman. Please post some photos.
User avatar
vegansydney
 
Posts: 97
Joined: Wed Aug 07, 2019 2:38 pm
Location: New York City

Re: Which Clubman have I got.

Postby ToBoldlyGo » Sat Feb 15, 2020 11:33 pm

If you are the one that posted on FB I can tell you that it looks like an Indian big bore exhaust.
ToBoldlyGo
 
Posts: 697
Joined: Thu Jul 02, 2015 7:34 pm

Re: Which Clubman have I got.

Postby St George » Sun Feb 16, 2020 4:11 pm

Pics sent to Toddy so everyone can see. Thanks for replies.
St George
 
Posts: 821
Joined: Fri May 30, 2014 3:48 pm

Re: Which Clubman have I got.

Postby Toddy » Sun Feb 16, 2020 8:59 pm

There you go buddy



Image

Image

Image

Image

Image
User avatar
Toddy
 
Posts: 6957
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: Which Clubman have I got.

Postby ToBoldlyGo » Mon Feb 17, 2020 9:06 pm

Indian big bore. Rough as a bears arse.
ToBoldlyGo
 
Posts: 697
Joined: Thu Jul 02, 2015 7:34 pm

Re: Which Clubman have I got.

Postby al pushpak » Tue Feb 18, 2020 8:24 am

"Indian big bore. Rough as a bears arse" But perform a lot better than most of the more expensive club mans available out there ! :D ;)
User avatar
al pushpak
 
Posts: 192
Joined: Sat May 31, 2014 8:42 am

Re: Which Clubman have I got.

Postby St George » Tue Feb 18, 2020 10:11 am

Thanks lads, it does sound nice. Job done.
St George
 
Posts: 821
Joined: Fri May 30, 2014 3:48 pm

Re: Which Clubman have I got.

Postby vegansydney » Wed Feb 19, 2020 4:22 am

If you plan on fitting it, I'd spend 10 minutes blending the U-bend where it mounts on the exhaust port with a Dremmel (or similar tool). This will aid the flow of exhaust gases.

I'm surprised you can't see sunlight through it :lol: That said, it looks no better than all the Casa U-bends (S3/GP/dl) I've seen :shock:

Image
User avatar
vegansydney
 
Posts: 97
Joined: Wed Aug 07, 2019 2:38 pm
Location: New York City

Re: Which Clubman have I got.

Postby St George » Wed Feb 19, 2020 5:52 pm

Thanks, the other side of the flange is nicely welded. Can fill the gaps with exhaust putty. Cheers.
St George
 
Posts: 821
Joined: Fri May 30, 2014 3:48 pm


Return to Tuning & Kits

Who is online

Users browsing this forum: Majestic-12 [Bot] and 11 guests