Floor side protectors

[Markpm]

I'm looking for some good quality side protectors for my floorboards on a series 3
A lot of the ones I have seen are dimpled on the outside face where the fixings are on the inside
I would like to avoid these ones
Any leads gratefully received

Cheers
Mark

[weeks]

Mark

Placed in series 1/2/3 section where you may get more attention.

Cheers

[Markpm]

Grazzi

[Markpm]

Anyone help here??

[foremanbob]

These what you looking for ?

http://www.jockeys-boxenstop.de/shop/en/ersatzteile-zubehoer/trittbrettverbreiterungen/trittbrettverbreiterung-scootrs-serie-3-dl-gp.html



although for all of these you need to drill holes to attach them...

[Markpm]

Kinda like those but not extensions
I've seen ones on scoot rs site
Costs as much to ship them as they cost in the first place lol
Cheers

[Toddy]

Any good uk dealers

http://www.thescooterrepublic.co.uk/lam ... -6285.html

http://www.buzzsolomoto.co.uk/scooters- ... viewDetail

[drivera]

If you do decide to ship them in from scootRS DONT USE FEDEX , you get ripped off for " Import Duty " at a later date by them , they reckon that they pay it on your behalf and have you over a barrel ?? I know as I got skinned for a disc brake I got , cost me another £30

[Scooter Paul]

These what you looking for ?

http://www.jockeys-boxenstop.de/shop/en/ersatzteile-zubehoer/trittbrettverbreiterungen/trittbrettverbreiterung-scootrs-serie-3-dl-gp.html



although for all of these you need to drill holes to attach them...

Apologies if this is high jacking this thread but I have a brand new set of extensions like this for sale. Never offered them up so I can't comment on fit etc. I want £30 plus post if anyone is interested. Please PM me.

Paul

[Markpm]

TSR looks like a shout
Thanks for replys

[peejay]

TSR looks like a shout
Thanks for replys

hi Mark
i bought this type (but not from TSR), where the stud is welded on there will be a very small dimple, you cant prevent that during the welding process but it hardly notices.
personally i think that with the studs welded on it causes loads of grief when fitting. i removed the studs and most of the weld with a dremel then drilled 6mm holes and used 5mm bolts to give me a bit of leeway to make things easier to fit.